Avago Technologies 3ware SAS 9750-16i4e - Manual (Page 37)

Shell Object Commands
www.lsi.com/channel/products 29
show selftest
The show selftest command shows all selftest schedules for the 3ware RAID
controllers in the system.
Example:
//localhost> show selftest
Selftest Schedule for Controller /c0
========================================================
Slot Day Hour SMART
--------------------------------------------------------
1 Sun 12:00am enabled
2 Mon 12:00am enabled
3 Tue 12:00am enabled
4 Wed 12:00am enabled
5 Thu 12:00am enabled
6 Fri 12:00am enabled
7 Sat 12:00am enabled
For additional information about selftest schedules, see “/cx add
selftest=ddd:hh” on page 61, and refer to the discussion of background tasks
and schedules in 3ware SATA+SAS RAID Controller Card Software User
Guide, Version 10.2.
show ver
The show ver command shows the CLI and API version.
Example:
//localhost> show ver
CLI Version = 2.00.03.0xx
API Version = 2.01.00.xx
In the above example, “xx” stands for the actual version. Refer to the Release
Notes for details.
show verify
The show verify command shows all verify schedules. The output shows
either the advanced or the basic verify schedule, depending upon which
schedule is enabled for each controller.
Example:
This example shows two controllers, one with an advanced verify schedule
and one with a basic verify schedule.
//localhost> show verify
Verify Schedule for Controller /c2