Cx/px show all, C x /p x show status – Avago Technologies 3ware SAS 9750-16i4e User Manual
Page 104
Chapter 2. CLI Syntax Reference
96
3ware SATA+SAS RAID Controller Card CLI Guide, Version 10.2
00 00 00 00 00 00 C4 32 00 C7 C7 01 00 00 00 00
00 00 C5 12 00 C8 C8 00 00 00 00 00 00 00 C6 10
00 C8 C8 00 00 00 00 00 00 00 C7 3E 00 C8 C8 01
00 00 00 00 00 00 C8 09 00 C8 C8 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 82 00 74 13 01 7B
03 00 01 00 02 3C 06 00 00 00 00 00 00 00 00 00
00 00 01 04 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
/cx/px show status
The /cx/px show shatus command shows the status of the drive attached to
the specified port. (Definitions of the drive statuses are available in the 3ware
SATA+SAS RAID Controller Card Software User Guide, Version 10.2.)
Example:
//localhost> /c0/p5 show status
/c0/p5 Status = OK
Note:
This command only returns the status pertaining to the drive of the
specified port. Its intended use is not for determining the status of a drive
relative to a unit (for that, please use “/cx/ux show” on page 72).
/cx/px show all
The /cx/px show all command shows all port-related attributes: status, model,
serial, firmware, capacity, and SMART (for SATA drives).
Example for SATA drive:
//localhost> /c3/p3 show all
/c3/p3 Status = OK
/c3/p3 Model = ST3750640AS
/c3/p3 Firmware Version = 3.AAK
/c3/p3 Serial = 3QD0RGX6
/c3/p3 Capacity = 698.63 GB (1465149168 Blocks)
/c3/p3 WWN = 0000000000000000
/c3/p3 Drive Type = SATA
- 3ware SAS 9750-24i4e 3ware SAS 9750-4i 3ware SAS 9750-4i4e 3ware SAS 9750-8e 3ware SAS 9750-8i 3ware 8006-2LP 3ware 8006-2LP (Channel) 3ware 9550SXU-4LP 3ware 9550SXU-4LP (Channel) 3ware 9550SXU-8LP 3ware 9550SXU-8LP (Channel) 3ware 9650SE-12ML 3ware 9650SE-12ML (Channel) 3ware 9650SE-16ML 3ware 9650SE-16ML (Channel) 3ware 9650SE-24M8 3ware 9650SE-24M8 (Channel) 3ware 9650SE-2LP 3ware 9650SE-2LP (Channel) 3ware 9650SE-4LPML 3ware 9650SE-4LPML (Channel) 3ware 9650SE-8LPML 3ware 9650SE-8LPML (Channel) 3ware 9690SA-4I 3ware 9690SA-4I (Channel) 3ware 9690SA-4I4E 3ware 9690SA-4I4E (Channel) 3ware 9690SA-8E 3ware 9690SA-8E (Channel) 3ware 9690SA-8I 3ware 9690SA-8I (Channel)