KEPCO KLP Series Developers Guide, Rev 3 - Manual (Page 79)

KLP-DEV 041213
5-17/(5-18 Blank)
reverse direction (the Loop From window is not active). The Loop count functions as
described above for Loop Direction UP.
FIGURE 5-15. PATTERN EXECUTION WINDOW
5.5.3 POWER SUPPLY EVENTS
Errors will cause the Power Supply Event Window (Figure 5-16) to open. This allows the user an
opportunity to correct the error condition and continue or quit the VXI plug&play application. If
this window opens when operating a master/slave configuration, power to both units must be
turned off, then reapplied before pressing either of the two buttons, otherwise the VXI plug&play
application will terminate incorrectly.
FIGURE 5-16. POWER SUPPLY EVENT WINDOW