Figure 4-7. front panel window, 2 software timed ramp example, Software timed ramp example -11 – KEPCO KLP Series Developers Guide, Rev 3 User Manual

Page 53: Front panel window -11

Text mode
Original mode

KLP-DEV 041213

4-11

FIGURE 4-7. FRONT PANEL WINDOW

4.6.2

SOFTWARE TIMED RAMP EXAMPLE

When the Software Ramp button on the front panel is depressed, the panel shown in Figure 4-8
is displayed. The figure illustrates a current ramp; the voltage ramp panel is similar. The {Power
Supply Mode switch on the front panel (Figure 4-7) determines whether the current ramp or volt-
age ramp is displayed. It is also possible to run this program by selecting either:

KepcoDCPwr Software Timed Ramp Example.vi for a voltage ramp
KepcoDCPwr Current Software Timed Ramp Example.vi for a current ramp.