beautypg.com

Figure 5-8. trigger window, Figure 5-9. calibration window – KEPCO KLP Series Developers Guide, Rev 3 User Manual

Page 73

background image

KLP-DEV 041213

5-11

FIGURE 5-8. TRIGGER WINDOW

The Calibrate button opens the Calibration Window (Figure 5-9), and is used to recalibrate the
unit (see Section 4 of the KLP User Manual). This button is disabled for master/slave configura-
tions; units must be configured for Standalone to be calibrated.

FIGURE 5-9. CALIBRATION WINDOW

The ABOUT button displays the model, serial number, firmware version number and driver ver-
sion number. Click OK to close the window

See also other documents in the category KEPCO Power suppliers: