Appendix b - scpi command/query definitions, B.1 introduction, Table b-1. scpi subsystem command/query index – KEPCO KLP Series Developers Guide, Rev 3 User Manual
Page 107

KLP 041213
B-1
APPENDIX B - SCPI COMMAND/QUERY DEFINITIONS
B.1
INTRODUCTION
This appendix defines the SCPI subsystem commands and queries used with the KLP Power
Supply. Subsystem commands are defined in PAR. B.3 through B.106, arranged Alphabetically
in groups as they appear in the tree diagram, Figure 6-2. Table B-1 provides a quick reference
of all SCPI subsystem commands and queries used in the KLP power supply.
TABLE B-1. SCPI SUBSYSTEM COMMAND/QUERY INDEX
COMMAND
PAR.
COMMAND
PAR.
ABOR
STAT:OPER:COND?
CAL
STAT:OPER:ENAB, ?
DISP:TEXT?
STAT:OPER[:EVEN]?
INIT[:IMM]
STAT:PRES
INIT:CONT, ?
STAT:QUES[:EVEN]?
[SOUR:]LIST:CLE
STAT:QUES:COND?
[SOUR:]LIST:CONT, ?
STAT:QUES:ENAB, ?
[SOUR:]LIST:CONT:POIN?
SYST:COMM:GPIB:ADDR, ?
[SOUR:]LIST:COUN, ?
SYST:COMM:LAN:AUTO, ?
[SOUR:]LIST:COUN:SKIP, ?
SYST:COMM:LAN:DHCP, ?
[SOUR:]LIST:CURR, ?
SYST:COMM:LAN:DNS, ?
[SOUR:]LIST:CURR:POIN?
SYST:COMM:LAN:GATE, ?
[SOUR:]LIST:DIR, ?
SYST:COMM:LAN:IP, ?
[SOUR:]LIST:DWEL, ?
SYST:COMM:LAN:MAC?
[SOUR:]LIST:DWEL:POIN?
SYST:COMM:LAN:MASK, ?
[SOUR:]LIST:QUER, ?
SYST:COMM:SER:BAUD, ?
[SOUR:]LIST:VOLT, ?
SYST:COMM:SER:ECHO, ?
[SOUR:]LIST:VOLT:POIN?
SYST:COMM:SER:ENAB, ?
MEAS:CURR?
SYST:COMM:SER:PACE, ?
MEAS:VOLT?
SYST:COMM:SER:PROM, ?
MEM:LOC, ?
SYST:ERR?
OUTP[:STAT], ?
SYST:ERR:CODE?
[SOUR:]CURR[:LEV][:IMM][:AMPL], ?
SYST:ERR:CODE:ALL?
[SOUR:]CURR:LIM:HIGH, ?
SYST:KLOCK, ?
[SOUR:]CURR:MODE, ?
SYST:LANG, ?
[SOUR:]CURR:PROT[:LEV], ?
SYST:PASS:CEN
[SOUR:]CURR[:LEV]:TRIG[:AMPL], ?
SYST:PASS:CDIS
[SOUR:]FUNC:MODE, ?
SYST:PASS:NEW
[SOUR:]VOLT[:LEV][:IMM][:AMPL], ?
SYST:PASS:STAT?
[SOUR:]VOLT:LIM:HIGH, ?
SYST:SEC
[SOUR:]VOLT:MODE, ?
SYST:SET, ?
[SOUR:]VOLT:PROT:LEV, ?
SYST:VERS?
[SOUR:]VOLT[:LEV]:TRIG[:AMPL]?
TRIG:SOUR, ?