KEPCO KLN 750W Series, Firmware Version 1.60 to 1.6x - Manual (Page 75)

KLN 750W 032614
B-1
APPENDIX B - SCPI COMMAND/QUERY DEFINITIONS
B.1 INTRODUCTION
This appendix defines the SCPI subsystem commands and queries used with the KLN 750W power
supply. Subsystem commands are defined in PAR. B.3 through B.51. Table B-1 provides a quick
reference of all SCPI subsystem commands and queries used in the KLN 750W.
B.2 NUMERICAL VALUES
Refers to integer
Refers to Floating (scientific notation: digits with decimal point and Exponent, e.g., 2.71E1 for 27.1.)
B.3 DISP:CONTrast COMMAND
DISP:CONT
Syntax: Short Form: DISP:CONT Long Form: DISPlay:CONTrast
Description: Sets the brightness of front panel Voltage and Current displays.
Argument: is a value in the range from 0 to 5.
Example: DISPlay:CONTrast 3 sets display contrast to level 3.
B.4 DISP:CONTrast? QUERY
DISP:CONT?
Syntax: Short Form: DISP:CONT? Long Form: DISPlay:CONTrast
Description: Returns the brightness level set by DISP:CONT.
Return Format:
TABLE B-1. SCPI SUBSYSTEM COMMAND/QUERY INDEX
COMMAND PAR. COMMAND PAR.
DISP:CONT, ? B.3, B.4 SOUR:VOLT:PROT:LEV, ? B.29, B.30
FETC? B.5 SYST:BEEP, ? B.31, B.32
OUTP, ? B.6, B.7 SYST:COMM:LAN:DHCP, ? B.33, B.34
OUTP:PON, ? B.8, B.9 SYST:COMM:LAN:GATE, ? B.35, B.36
SOUR:CURR, ? B.10, B.11 SYST:COMM:LAN:IP, ? B.37, B.38
SOUR:CURR:PROT:LEV, ? B.12, B.13 SYST:COMM:LAN:IPAD, ? B.39, B.40
SOUR:LIST:DTIM, ? B.14, B.15 SYST:COMM:LAN:MAC, ? B.41, B.42
SOUR:LIST:RTIM, ? B.16, B.17 SYST:COMM:LAN:RES B.43
SOUR:MEM:CLS B.18 SYST:COMM:LAN:SMAS, ? B.44, B.45
SOUR:MEM:CURR:X, ? B.19, B.20 SYST:COMM:LAN:TEL:PORT, ? B.46, B.47
SOUR:MEM:LIST:X? B.21 SYST:ERR? B.48
SOUR:MEM:REC:X, ? B.22, B.23 SYST:KLOC, ? B.49, B.50
SOUR:MEM:VOLT:X, ? B.23, B.24 SYST:LOC B.51
SOUR:VOLT, ? B.25, B.26 SYST:REM B.52
SOUR:VOLT:LIM:LOW, ? B.27, B.28 SYST:VERS? B.51
NOTE: Commands listed above that are followed by “, ?“ have a related query.