TA Triumph-Adler DC 2162 - Manual (Page 92)

Document and Output Management Functions
2-10
5 Complete the function settings as required.
The following functions are available.
If you select documents that were registered from a computer and choose [W/ current setting]
([Current setting]), only the settings for paper selection and collate/offset will be available.
To select other documents, press [Select document].
6 Use the numeric keys to enter the copy quantity.
7 Press the Start key to start printing.
Batch Printing of Documents
All documents stored in the Synergy Print Box can be printed as a single job using the following
procedure.
1 Press the Document Management key.
2 Under Synergy Print Box, press
[Document Printing].
3 Select the source box. To enter the box
number, press the key for the box, or
use the numeric keys followed by
pressing [Enter].
If a password has been set up for the
box, a screen for password entry will be
displayed. Use the numeric keys to enter
the password and press [Enter].
NOTE: For instructions on setting up
passwords, refer to Specifying Box
Passwords on page 2-14.
Tab Functions
Basic Paper selection, Collate/offset, duplexing, and stapling or hole punching
Edit Image compositing, margins, covers, page numbering, booklets, and output
destination
Document Management
Select function.
Registr.
Shared Data Box
Document Document Form
Registr.
Document
Synergy Print Box
Box
Editing
Form box
Box
Editing
Box
Editing
0
Document
Printing Registr. Printing
Document Printing
Select box No.
Document Management Synergy Print Box -
Stop d.
Enter
Clear
(Enter #-key) Password