TA Triumph-Adler DC 2162 - Manual (Page 18)

Copying Functions
1-12
3 Press [1 staple] or [2 staples].
4 Select the staple position.
5 Place the originals in the document processor or on the platen and press the Start key.
If the original is placed on the platen, Scan next original(s) will be displayed. Place the next original
and press the Start key.
After scanning all originals, press [Scanning finished] to start copying.
Back
Select Origi
Off
1 staple
Orientation.
Top Edge
Staple/Punch
Ready to copy.
Punch
2 holes
2 staples
Off
Paper Size
A
Staple
100%
Register
Top
3 holes
Back
Select Orig
Off
1 staple
Orientation.
Top Edge
2 staples
Punch
Staple/Punch
Staple Position
Left side
Right side
Top side
Off
2 holes
100
Register
Top
3 holes