TA Triumph-Adler DC 2162 - Manual (Page 127)

System Settings
3-27
Orientation of Original Document
Specifying the orientation of the original document on the platen. This is accomplished by telling the
copier the direction to which the top side of the original faces.
1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
2 Press [S] or [T] to select Original
Orientation and press [Change #].
3 Select [Top Edge Top] when the top of
the original is facing towards the rear
side of the copier or [Top Edge Left]
when the original is facing towards the
left side of the copier.
4 Press [Close]. The touch panel will return to the Machine Default screen.
Setting Sleep Timer Timeout
The Sleep timer conserves energy when there is no operation on the operation panel or no data is
received. This predetermines the period of time before the copier enters sleep mode.
The Sleep timer can be set from 1 to 240 minutes in 1-minute increments.
NOTE: If the copier is used frequently, we recommend using a longer timeout. If it is used
infrequently, use a shorter timeout.
1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
2 Press [S] or [T] to select Sleep mode
changing time and press [Change #].
System Menu / Counter
System Menu
Machine Default
Media Type (paper weight)
Select media type(2sided)
Default menu Setting mode
Specif. paper action mode
Original Orientation
Adjust print direction
Top Edge Top Change #
Check MP tray sizing On
Original Orientation
System Menu Machine Default
Select default mode for Original Orientation ,
Top Edge or Top Edge Left .
Back
Top Edge
Top Edge
-
Top
Left
ystem Menu
Machine Default
Default menu
Select media type(2sided)
Specif. paper action mode
Change #
Original Orientation
Sleep mode changing time
System Menu / Counter
Setting mode
Adjust print direction
Top Edge Top
Minute
Media Type (paper weight)
90