TA Triumph-Adler DC 2162 - Manual (Page 111)

System Settings
3-11
Adjusting Auto Density
Adjusting the median density for Auto Density by changing the reference density.
1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on
page 3-3.)
2 Press [S] or [T] to select Adjust auto
density and press [Change #].
3 Press [Lighter] if you desire to make
copied images lighter or [Darker] if you
desire to make copied images darker,
when automatic density is selected.
4 Press [Close]. The touch panel will return to the Copy Default screen.
Adjusting Automatic Density for Scanning Text Documents
This menu allows the adjustment of the scanning density when the copier is installed with the
optional scanner. Adjust the density so that the best readability is obtained when the scanned image
is printed and processed with an OCR software application.
NOTE: This setting is available only if the copier is equipped with the optional scanner kit.
1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on
page 3-3.)
2 Press [S] or [T] to select Adjust auto
density (OCR) and press [Change #].
3 Press [Lighter] to make the scanned
image lighter or [Darker] to make the
scanned image darker.
System Menu / Counter
System Menu
Copy Default
Select media type(APS)
Default Paper Source
Default menu Setting mode
Paper Source for Cover
Auto % Priority Setting
Adjust auto density.
Plain
Change #
Cassette 1
Multi purpose tray
Off
Standard
Adjust auto density. Back
Copy Default System Menu
Adjust density default setting. (Auto)
Lighter Dar
-
System Menu / Counter
System Menu
Copy Default
Default Paper Source
Paper Source for Cover
Default menu Setting mode
Auto % Priority Setting
Adjust auto density.
Adjust auto density(OCR)
Cassette 1
Change #
Multi purpose tray
Off
Standard
Standard
Adjust auto density(OCR)
System Menu Copy Default
Back
Lighter D
-