TA Triumph-Adler DC 2162 - Manual (Page 63)

Copying Functions
1-57
Programmed Copying
Registers combinations of up to eight copy modes and functions displayed on the operation panel
as a single program. After registering sets of frequently used functions as a single program, you can
simply press the program number as needed to recall those functions. You can also name the
programs to identify them.
Registering Programs
Follow the steps as below to register programs.
1 Access the copy mode to register (e.g., five sets of copies, Collate mode, or Margin mode) and
press [Program].
2 Press [Register].
3 Press a number (1 to 8) for the program
number.
4 Enter the program name and press
[End].
NOTE: For instructions on entering
characters, refer to Entering
Characters on Touch Panel on
page 3-55.
5 Press [Yes] to register the program.
to copy.
A4
Paper Size Set
Reg./Delete
Register
Delete
Change
4-in-1
Bord Erase
Margin
Left
Program Function User choice
100%
Sheet
Name
Register present setting
Select program number.
No registration
No registration
No registration
No registration
No registration
No registration
No registration
No registration
Name to display
Capital
Stop
Letter Num./Sym. Space
Char.Limit:16 including #
AllDel.
Register program.
The set program is registered. Is it correct?
Program #
Program name
Yes No