TA Triumph-Adler DC 2162 - Manual (Page 117)

System Settings
3-17
2 Press [S] or [T] to select Repeat Copy
and press [Change #].
3 Select [Off] to disable and select [On] to
enable repeat copy under Function. To
make repeat copy the default, select
[On] under Default.
4 Press [Close]. The touch panel will return to the Copy Default screen.
Enabling Job History Display
Enables or disables the [Job History] screen in the output management mode. The [Job History]
screen provides information on the completed jobs in the copier. For details, refer to Output
Management Functions on page 2-16.
1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on
page 3-3.)
2 Press [S] or [T] to select Job Queue
Report and press [Change #].
3 Select [Off] not to display the [Job
History] screen under Print Document
(Refer to Output Management Functions
on page 2-16). Select [On/All job] or
[On/reserved] ([On/Reserv.job]) to
display the [Job History] screen under
Print Document.
4 Press [Close]. The touch panel will return to the Copy Default screen.
System Menu
Copy Default
Default menu
Default margin width
Default erase width
Change #
Preset limit
System Menu / Counter
Setting mode
Repeat Copy On / Default Off
Left
Border
Gutter
Set
6 mm 6 mm
0 mm 0 mm
Auto Image Rotation Rotate
Repeat Copy
System Menu Copy Default
Select ON to activate Repeat Copy or OFF
to inactivate it.
Back
Off
On On
Function
Off
Default
-
System Menu
Copy Default
Default menu
Default erase width
Preset limit
Change #
Repeat Copy
Job Queue Report
System Menu / Counter
Border
On / Default Off
On (All jobs)
Setting mode
Gutter
Set
6 mm 6 mm
Default margin width Left 0 mm 0 mm
Job Queue Report
System Menu Copy Default
Select ON to activate Copy Job Log or OFF
to inactivate it.
Back
Off
On/
All job
On/
Reserv.job
-