TA Triumph-Adler DC 2162 - Manual (Page 165)

Job Accounting
4-5
7 Select Name to display and press
[Change #].
8 Enter the department name and press
[End].
For instructions on entering characters,
refer to Entering Characters on Touch
Panel on page 3-55.
9 When all entries are complete, press
[Next].
IMPORTANT: An error will occur if you
do not complete Account ID and Name
to display. You will not be able to
proceed to the next screen. Be sure
that you have completed the entries.
An error will occur if you attempt to
enter an existing department ID code.
You will not be able to proceed to the
next screen. Use a different ID code or
name.
10 Specify restrictions on copying as
desired.
For instructions on restricting copier
usage, refer to Restricting Usage Copier
on page 4-6.
11 Press [Registr.] to finalize settings.
To make settings on another department, press [Register] and repeat steps 4 to 11.
12 Press [Close]. The touch panel will return to the Job Accounting screen.
System Menu
New register
Setting Item
Account ID
Name to display
Change #
Value
(Not specified)
Job Management Edit - -
33333333
Name to display
Capital
Stop
Letter Num./Sym. Convert Space
Char.Limit:32 including #
AllDel.
Job cancel
Job
Value Item
3st sales division
Management Edit
Change #
Next
- -
Account ID
New register
System Menu Job
Value Setting Item
Permitted
Output limitation
3st sales division
Management Edit
Change #
No limit
On
Scanner transmission No limit
Permitted On
33333333
- -