TA Triumph-Adler DC 2162 - Manual (Page 75)

Copying Functions
1-69
Processing of Finished Copies
Specify stacking of accomplished copies as follows. If your copier is equipped with the optional
document finisher, you can also specify stapling or hole punching.
1 On the [Basic] screen, press [Finished].
NOTE: The finishing settings apply to
all other steps. Simply complete this
setting once as an initial step.
2 For finishing, press [On] ([1 set] or
[Output each page]) or [Off]. Refer to
Offset Mode on page 1-10 for details.
For stapling, press [Staple Mode] and
complete the settings. Refer to Stapling
on page 1-11 for details.
Function Optional Equipment Description
Stacking Document finisher: None Each completed set is rotated 90 ° before
stacking.
Document finisher: Installed Stacked by the document finisher.
Stapling Document finisher: None Stapling is not available.
Document finisher: Installed Stapling is available.
Center margin
stapling Document finisher: None Center margin stapling is not available.
Document finisher: Installed
Folding unit: None Center margin stapling is available.
Document finisher: Installed
Folding unit: Installed Center margin stapling as well as center
margin with center folding is available.
Punching Document finisher: None Punching not is available.
Document finisher: Installed
Punching unit: Installed Punching is available.
Ready to Job build.
Job Build
A4
Paper
1-sided
Basic Quality
Zoom
Top Edge Top
Original
Finishing
2-sided Copy
Edit
1-sided Copy-Left
Finished page #:
Step
Auto %
Original
Set original. Press Start key.
Orient.
1-sided/
2-sided Selection Type
Set original. Press Start key.
Back Finishing
Ready to Job build.
Off
Top Edge
Select Origi
Orientation.
On
Staple Punch Mode
Mode
Center
Staple
Offset Staple Punch
Off
Top
Set original. Press Start key.
Back Staple Mode
Ready to Job build.
Top Edge
Select Origi
Orientation.
Limited number of pages to be stapled . Off
1 staple
2 staples
The limitation depends on setting mode .
Cannot combine offset function and
staple.
Staple
Top
!