TA Triumph-Adler DC 2162 - Manual (Page 36)

Copying Functions
1-30
Form Overlay
Copy the original images onto the form. Once you scan
and register the form, the scanned original is overlayed
onto the form.
NOTE: To register the form, refer to Form Box on
page 2-2.
Follow the steps as below for form overlay.
1 Press [Function].
2 Press [Form Overlay].
3 Press [On].
4 Press [+] or [-] to adjust the density of
the form. Choose from ten levels in 10 %
increments.
A sample copy image is displayed to the
right.
5 To use forms already registered, press [Form Selected] ([Form Selection]) and proceed to step 6.
To scan new forms, move to step 8.
6 Press [Select Stored Frm] ([Loading
Form]).
Originals Copies Forms
Ready to copy.
A
Paper Size
Program Function User choice Basic
Density Zoom
Cover
Booklet
Up
Continuous
Scan
Mixed Size
Originals
Border
Paper
Original
Duplex
Margin/
Centering
Collate/
Offset
Original
Size
Page
Combine
Form
Overlay
Down
100%
Selection
Erase
numbering Image
Back Form Overlay
Ready to copy.
Off
On
Paper Size
A
1st scanned image can be used
for copy after second original im
100%
Register
Form Overlay
Off
Set form.
Press Start key.
Paper Size
A
Density
On
Back
Form
Selection
Scan form once
100%
Register
Scan form
Loading
Back Form Selection
Overlay 1st image on the scan
image or on registered form. Form
once