TA Triumph-Adler DC 2162 - Manual (Page 107)

System Settings
3-7
4 Press [Close]. The touch panel will return to the Copy Default screen.
Correcting Black Line
Set Fine Black Line correction to reduce the black lines (dragged stains not appearing on the
original) that may occur when copying using the document processor.
1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on
page 3-3.)
2 Press [S] or [T] to select Correcting
Black Line and press [Change #].
3 Select [Off], [On (Low)] or [On (High)].
NOTE: When suppressing black
streaks, select [On (Low)]. Select [On
(High)] only when the black streaks are
not suppressed with the Low setting.
When fine black line correction is
enabled, the ability to reproduce fine
text characters is reduced. For normal
usage, the default setting ([Off]) is
recommended.
4 Press [Close]. The touch panel will return to the Copy Default screen.
Paper Selection
Specifies whether the copy paper is automatically selected according to the size of the original
document or the copy paper in the default cassette is forcibly selected.
1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on
page 3-3.)
2 Press [S] or [T] to select Paper
Selection and press [Change #].
3 Choose [APS (automatic paper
selection)] or [Default cassette].
System Menu / Counter
System Menu
Copy Default
Default menu Setting mode
Correcting Black Line Change # Off
EcoPrint Off
Original Image Text + Photo
Background Density Adj. Standard
Thin Line adjustment 4
Correcting Black Line
System Menu Copy Default
Suppresses black streaks that may appear on images.
This may deteriorate the way fine lines are reproduced .
Back
Off
On
On
-
(Low)
(High)
System Menu / Counter
System Menu
Copy Default
Default menu Setting mode
Correcting Black Line
Paper Selection Change #
Off
APS
EcoPrint Off
Background Density Adj. Standard
Thin Line adjustment 4
Paper Selection
System Menu Copy Default
Setting paper select mode .
Back
APS
Default
cassette
-