TA Triumph-Adler DC 2162 - Manual (Page 121)

System Settings
3-21
3 Use the numeric keys to enter the
four-digit management code. By default,
the management code is 6200 for the 62
cpm model and 8200 for the 82 cpm
model. The Machine Default screen will
be displayed.
NOTE: For security, it is recommended to change the management code. Refer to Changing
Management Code on page 3-32.
When installing the optional security kit, enter the eight-digit management code. By default, the
management code is 62006200 for the 62 cpm model and 82008200 for the 82 cpm model.
Proceed to the following sections to customize individual settings.
Enabling Auto Cassette Switching
If the cassette in use runs out of paper, the copier can continue copying by automatically switching
to another cassette loaded with the paper of the same size and orientation. You can specify not to
switch to the cassette if the media type differs.
1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
2 Press [S] or [T] to select Auto cassette
switching and press [Change #].
3 Select [On] to enable automatic cassette
switching.
4 To avoid switching to the cassette loaded with the different media type, press [Only same media
type] under Media Type.
5 Press [Close]. The touch panel will return to the Machine Default screen.
Enter the administrator number.
System Menu
System Menu / Counter
Auto cassette switching
Paper size (Cassette 3)
Paper size (Cassette 4)
Media Type (Cassette 1)
Media Type (Cassette 2)
Change #
Default menu
On / All types of paper
A3
Auto/Inch
Plain
Recycled
Setting mode
Machine Default
Auto cassette switching
System Menu Machine Default
When paper cassette is empty, switch to another one,
set same size/direction paper, and continue copying.
Back
On
Off
Only same
Function
All types
Media Type
-
media type
of paper