TA Triumph-Adler DC 2042 - Manual (Page 99)

95
TROUBLESHOOTING
Trouble Checks Action Page
If trouble occurs, carry out the applicable checks and action given below.
If the trouble persists, contact your service representative.
Nothing lights on
operation panel when
main switch is turned
ON (
❘ ).
Is the power plug connected to an AC
outlet?
Connect the plug to an AC outlet. ----------
No copies come out
when the Start key is
pressed.
Has a message appeared in the touch
panel's message display? Read the message, and take action in
accordance with it.
83
Copies come out blank. Are the originals set correctly ?
Set originals face up in the DF and set
them correctly.
When originals are set on the platen,
face them down and align them with
original size indicator lines.
15, 16
Copies come out too
light. Is the copier in the auto exposure
mode? Adjust exposure settings in the "AUTO
EXPOSURE ADJUSTMENT".
73
Is the copier in the manual exposure
mode?
Adjust the exposure to the correct
degree using the manual exposure
adjustment keys.
17
To adjust the overall exposure,
perform "MANUAL EXPOSURE
ADJUSTMENT".
73
Is Added toner massage displayed? Replace the toner cartridge. 85
Is paper damp or wet? Replace the paper with new paper. 11