TA Triumph-Adler DC 2042 - Manual (Page 49)

1. Set the original(s).
2. Press the Sorter mode key.
Sorter mode will be set.
3. Press the Start key.
* When setting the original in the DF, read-in will be started, and copying will be
performed.
* When setting the original on the platen, "CONTINUE SCANNING DOCUMENT?" will
be displayed. Go to next step.
45
FUNCTIONS
4. Set the next original and touch the "CONTINUE" key.
* Repeat this operation for all the originals.
5. After all originals have been read, touch the "TO PRINT" key.
Copying will be performed one by one.
(20) Memorizing frequency used settings [Program mode]
Up to seven combinations of copy modes and functions displays on the operation panel
can be registered.
1 How to register settings
1. Set the desired copy modes to be memorized on the operation panel and return to the
basic screen.
2. Touch the "SPECIAL" key.
The management mode setting screen will appear.
3. Touch the "REGISTER" key for the program.
4. Touch the number ("1" to "7") to be registered.
The preset function will appear.
* The detailed setting will be displayed by touching each key. Touch the "CHECK" key
to return to the previous screen.