TA Triumph-Adler DC 2042 - Manual (Page 32)

28
FUNCTIONS
4. Select the type of originals by touching the "DUPLEX" key or "BOOK" key.
If "BOOK" is selected as the type of originals, go to next step.
If "DUPLEX" is selected, the touch panel will return to the basic screen.
5. Select the binding direction by touching the "LEFT" key or "RIGHT" key.
The touch panel will return to the basic screen.
(8) Making copies with clean edges [Border erase]
● Erasing blemishes from edges of copies (Sheet)
Use to erase shadows, lines, etc., which occur around the edges of copies made from
sheet originals. (
a is the width of erasing border)
● Erasing blemishes from edges and middle of copies made from books (Book)
Use to make neat copies from thick books. ( a is the width of erasing border)
● Selecting the erasing parts (Custom)
For making neat, blemish-free copies from originals of non-standard sizes, i.e. sizes
other than A4 or B4 etc. (
a is the area of erasing border)
However, the size of the original must be registered in advance. (page 74, " # CUSTOM
SIZE FOR BORDER ERASE.")
* The left illustration displays the finishing of the copies when originals are set in the DF.
When setting originals on the platen, copying will be performed based on the left rear
position.