TA Triumph-Adler DC 2042 - Manual (Page 62)

58
APPLICABLE COPY MODES
2. Touch the "BATCH COPY FROM PLATEN" key.
3. Select the type of originals by touching the "SHEET ORIGINALS" key, "BOOK
ORIGINALS" key or "SHEET & BOOK ORIGINALS" key.
4. Select the finishing of copies by touching the "2-SIDED COPY" key or "1-SIDED
COPY" key.
* If the "SHEET & BOOK ORIGINALS" key has been touched in step 3, go to next
step. If the "BOOK ORIGINALS" key has been touched, go to step 6. If the "SHEET
ORIGINALS" has been touched, go to step 7.
5. Select the type of originals to be read by touching the "SHEET ORIGINAL" key or
"BOOK ORIGINAL" key.
* If the "SHEET ORIGINAL" key is touched, go to step 7. If the "BOOK ORIGINAL" key
is touched, go to next step.
6. Select the binding direction of the book original.
7. The read-in starting screen will appear.
* The auto magnification selection mode has been set for the initial mode. When
setting the custom paper size or the custom zoom ratio, touch the manual key until
"1:1" is displayed on the zoom ratio display.