TA Triumph-Adler DC 2018 - Manual (Page 97)

Advanced Functions
OPERATION GUIDE 5-5
Remote Switching
Remote switching lets you receive faxes by forwarding the fax signal from
a telephone connected to the FAX System. This function is convenient if
you are using a regular phone at another location, allowing you to use that
phone to receive faxes as well.
NOTE: Remote switching requires a telephone provided by the user that
supports tone dialing. This phone must be connected to the FAX System.
Changing the Remote Switching Number
Change the remote switching number (the default value is 55).
1 Press System Menu/Counter.
2 Press S or T to select FAX Setting. Press Enter.
3 Press S or T to select FAX RX Setting. Press Enter.
4 Press S or T to select Remote SW Dial. Press Enter.
5 Use the numeric keys to enter the
new remote switching number (2
digits). Press Enter to register the
number.
6 Press right Select to return to the basic screen.
Receiving Faxes Remotely
Perform the following procedure to initiate fax reception from a connected
telephone.
1 The telephone will ring for
incoming calls.
Remote SW Dial
55
Cancel
(00 ~ 99)
: