TA Triumph-Adler DC 2018 - Manual (Page 123)

Advanced Functions
OPERATION GUIDE 5-31
Password-based Communications
This function restricts access to transmission and reception, requiring
users to meet password requirements. Password-based communications
lets you restrict the sending and receiving of faxes with the FAX System to
authorized individuals. Passwords are registered in advance for authorized
telephone numbers and authorized IDs, after which these functions are
activated. In this mode, no special steps involving passwords are required
to send or receive faxes. Jobs that meet the password requirements are
processed as usual, but those that do not result in errors, preventing
transmission or reception.
Requirements
• Passwords must be registered in the FAX System (specifically,
authorized telephone numbers or authorized ID).
• Authorized telephone numbers or authorized ID must be registered on
the other party’s fax machine.
• Password communications must be activated in advance. (Refer to
Activating Password-based Communications on page 5-36.)
• Authorized telephone numbers registered in the FAX System must
match the telephone numbers of other parties.
• Authorized IDs registered in the FAX System must match the IDs of
other parties.
• When you fax to recipients using the Address Book, the last four digits
of their number must match the last four digits of the authorized
numbers.
• To receive faxes, the last four digits of the other party’s number must
match the last four digits of an entry in the Address Book.
NOTE: For instructions on setting the ID of the FAX System, refer to
Entering your station ID on page 2-6.
Registering New Authorized Telephone Numbers
Perform the following procedure to register authorized telephone numbers:
NOTE: You can register up to 10 authorized telephone numbers.
1 Press System Menu/Counter.
2 Press S or T to select FAX Setting. Press Enter.
3 Press S or T to select FAX RX Setting. Press Enter.
4 Press S or T to select TX/RX Restrict. Press Enter.