TA Triumph-Adler DC 2018 - Manual (Page 77)

Basic Functions
OPERATION GUIDE 4-9
Timer-based Transmission
Schedules fax transmission for
later. Timer-based Transmission
can be combined with various
other functions, including
sequential broadcast
transmission. This example
shows how to set up the FAX
System to fax documents to a
single destination at a specified
time.
NOTE: Timer-based Transmission is not available in Direct Transmission
mode. The fax memory can hold up to 30 jobs for timer-based
transmission at once.
Be sure that the correct time is set for the FAX System before sending
faxes using this method. To adjust the time, refer to Setting the Current
Date and Time (Date & Time Setting) on page 2-7.
1 Place the original documents to transmit in the document processor or on
the platen.
2 Press Send.
3 Press Function.
4 Press S or T to select FAX Delayed TX. Press Enter.
5 Press S or T to select On. Press
Enter.
6 Press S or T to set Hour. Press
X.
*
FAX Delayed TX
On
Off *
Cancel
:
c 11 : 45
Start Time
Hour Min.
Cancel
Current Time ( 11:45)
: