TA Triumph-Adler DC 2018 - Manual (Page 157)

FAX System Settings
OPERATION GUIDE 7-3
FAX
Setting FAX RX
Setting Rings
(Normal) 1 – 15 Rings Specify the number of rings in auto
reception mode. page 7-12
Rings
(TAD) 1 – 15 Rings If the FAX System is set to enable
automatic switching between the
fax and answering machine (when
used with a regular telephone
answering machine), this setting
specifies the number of rings until
fax reception begins if the
answering machine is off. page 7-12
Rings
(FAX/
TEL) 0 – 15 Rings If the FAX System is set to enable
automatic switching between the
fax and telephone (when used with
a regular telephone), this setting
specifies the number of rings until
fax reception begins. page 7-13
RX
Setting Auto (Normal),
Auto (FAX/TEL),
Auto (TAD),
Auto (DRD),
Manual Specify the desired fax reception
mode. page 7-14
RX Date/
Time Off, On Print the date/time of reception,
sender identification, and page
number at the top of each
document page received. page 7-18
2in1 RX Off, On Print two 5 1/2 × 8 1/2 "/A5-sized
faxes received consecutively on a
single 11 × 8
1/2 "/A4 sheet.
page 7-19
RX Bulk
Print Off, On Print all fax image data together
upon completed reception by the
FAX System. page 7-20
Service
Setting Remote
Diag.Set. – Off, On Enable the service center computer
to access the FAX System via the
telephone line for troubleshooting
when the user contacts a service
agent. page 7-21
Remote
Diag. ID – 0000 – 9999 Enter the FAX System’s unique ID
as instructed by a service agent. page 7-22
†. The available range varies depending on countries.
Main
Menu
Sub
Menu1
Sub
Menu2
Options Description
Reference
Page