TA Triumph-Adler DC 2018 - Manual (Page 162)

FAX System Settings
7-8 OPERATION GUIDE
Volume
Adjust the speaker level and volume of the fax monitoring tone. Switch off
sound setting if no tone or speaker output is needed.
NOTE: Refer to the Advanced Operation Guide for instructions on
adjusting the volume for warning tones (after errors) and confirmation
tones for operation panel keys.
Adjusting Speaker Levels
Perform the following procedure to adjust the volume of the built-in speaker
in off-hook mode when T On-Hook is pressed.
1 Press System Menu/Counter.
2 Press S or T to select Common Setting. Press Enter.
3 Press S or T to select Sound Setting. Press Enter.
4 Press S or T to select FAX Speaker. Press Enter.
5 Press S or T to adjust the
volume. Press Enter.
6 Press right Select to return to the basic screen.
Adjusting the Monitor Tone Volume
Perform the following procedure to adjust the volume of the built-in speaker
during auto-transmission in off-hook mode when T On-Hook is not
pressed.
1 Press System Menu/Counter.
2 Press S or T to select Common Setting. Press Enter.
3 Press S or T to select Sound Setting. Press Enter.
4 Press S or T to select FAX Monitor. Press Enter.
FAX Speaker
2 Middle
1 Minimum
Cancel
3 Maximum
:
*