TA Triumph-Adler FAX 950 - Manual (Page 70)

6-10
6HFWLRQ
Troubleshooting
Is your telephone service set for pulse
dialling?
Did you use the correct remote reception
number?
Is the modular cord connected correctly?
Is Password Check reception ON?
Is the ERROR indicator lit?
Is the memory full?
Broadcast transmission
cannot be carried out
Remote reception cannot
be carried out
Reception cannot be carried
out
Memory reception cannot
be carried out
Polling reception cannot be
carried out
Problem Check point Procedure Page
Is the memory full? Start the Broadcast transmission procedure
once again from the beginning after clearing
sufficient data from memory. 2-18
Some telephones allow you to transmit the
desired tone signals after pressing the star
"
" or other key. Refer to the Instruction
manual for the telephone being used.
–––––
Check the registered number. 8-4
Connect the modular cord correctly. 2-3
Turn Password Check reception OFF. 9-5
Perform the necessary procedure to correct
the error and try to receive the documents
again. 6-2
Clear sufficient data from memory. 2-18
Did the transmitting party perform the
polling transmission procedure correctly? Check with the transmitting party. –––––
2-3
6-2
Transmission cannot be
carried out Is the modular cord connected correctly?
Is the ERROR indicator lit?
Connect the modular cord correctly.
Perform the necessary procedure to correct
the error and try to transmit the documents
again.