TA Triumph-Adler FAX 950 - Manual (Page 110)

9-4
6HFWLRQ
Other Settings and Registration
Add Sample Image on Reports ON/OFF
Select here whether or not a sample image of part of the first page of
transmitted documents will be included on Transmission reports.
* To cancel the procedure part way through, press the STOP key.
The message display will revert to the initial mode.
* If Restricted access is turned ON, it is first necessary to enter the
registered management password and then press the ENTER
FUNCTION key. Refer to “(5) Entering Your Access Code”, page 7-28.
1. Press the FUNCTION key.
2. Press the ( 씱 ) cursor key until the following message appears in
the message display.
3. Press the ENTER FUNCTION key.
4. Press the ( 씰 ) cursor key until the following message appears in
the message display.
5. Press the ENTER FUNCTION key.
6. Use the cursor keys ( 씱 ) ( 씰 ) to select whether you want to turn
Add sample image on reports ON or OFF.
7. Press the ENTER FUNCTION key.
8. Press the STOP key. The message display will revert to the initial
mode.
6(7 '2&80(17
)81&7,21
6(77,1*
6(77,1*
5(3257:,7+&23<
5(3257:,7+&23<
21
5(3257:,7+&23<
2))
Message Display and Reports/Lists
Language
The language used in the message display and on reports/lists can
be selected here. Available languages (in order of appearance when
the (
씰 ) cursor key is pressed): English, French, Spanish, Italian,
German, Swedish, Dutch, Finnish, Danish and Portuguese.
* To cancel the procedure part way through, press the STOP key.
The message display will revert to the initial mode.
* If Restricted access is turned ON, it is first necessary to enter the
registered management password and then press the ENTER
FUNCTION key. Refer to “(5) Entering Your Access Code”, page 7-28.
1. Press the FUNCTION key.
2. Press the ( 씱 ) cursor key until the following message appears in
the message display.
3. Press the ENTER FUNCTION key.
4. Press the ( 씰 ) cursor key until the following message appears in
the message display.
5. Press the ENTER FUNCTION key.
6. Use the cursor keys ( 씱 ) ( 씰 ) to select the desired language.
7. Press the ENTER FUNCTION key.
8. Press the STOP key. The message display will revert to the initial
mode.
6(7 '2&80(17
)81&7,21
6(77,1*
6(77,1*
/$1*8$*(