TA Triumph-Adler FAX 950 - Manual (Page 34)

2-22
6HFWLRQ
Fax Operation (Basic)
7. Press one-touch key No. 9 (“XYZ”) three times.
8. Press the ( 씰 ) cursor key to register the displayed character.
9. Once character input is completed, press the ENTER FUNCTION
key.
Abbreviated Numbers
(1) Registering
Up to 100 fax numbers can be registered under abbreviated numbers.
Enter the desired fax number by simply pressing the 2-digit
abbreviated number (00 - 99) under which that number is registered.
* To confirm the fax numbers registered under each abbreviated
number, print out an Abbreviated number list. (Refer to “(3) Printing
Out the One-Touch Key and Abbreviated Number Lists”,
page 2-20.)
* To cancel the procedure part way through, press the STOP key.
The message display will revert to the initial mode.
* If Restricted access is turned ON, it is first necessary to enter the
registered management password and then press the ENTER
FUNCTION key. Refer to “(5) Entering Your Access Code”, page 7-28.
1. Press the ENTER FUNCTION key.
2. Press the ( 씰 ) cursor key until the following message appears in
the message display.
3. Press the ENTER FUNCTION key.
4. Press the ENTER FUNCTION key once again.
5. Use the keypad to enter 2 digits (00 - 99) corresponding to the
desired abbreviated number.
6. Press the ENTER FUNCTION key.
7. Use the keypad to enter the fax number to be registered under that
abbreviated number. (Max. 32 digits)
8. Press the ENTER FUNCTION key.
9. To designate this abbreviated number for F-Code based or
Encryption transmission, use the keypad to enter a SUB
(subaddress). (Max. 20 digits)
If you do NOT want to designate this abbreviated number for
F-Code based or Encryption transmission, proceed to step 12.
* The entered SUB (subaddress) will also be used as the SEP
(selective polling address).
10. Press the ENTER FUNCTION key.
11. Use the keypad to enter a SID (subaddress ID). (Max. 20 digits)
* If you do NOT want to register a subaddress ID for this
abbreviated number, proceed to step 12.
* The entered SID (subaddress ID) will also be used as the PWD
(F-Code password). As neither the SID nor PWD will be printed
out on any report or list, it is recommended that you keep some
sort of note of that information.
12. Press the ENTER FUNCTION key.
13. Enter the name of the other party. (Max. 16 characters)
* Refer to “ ● Entering Characters”, page 2-21, for more detailed
information on entering characters.
14. Press the ENTER FUNCTION key.
15. Press the cursor keys ( 씱 ) ( 씰 ) until the desired fax transmission
speed appears in the message display.
16. Press the ENTER FUNCTION key.
* If you did NOT enter a SUB (subaddress) in step 9, proceed to
step 21.
1$0($W=
7
8
9
3
5 6
2
26 27
21 22
31 32
36 37
1 2
6 7
11 12
ABC DEF
PQR ST
@ . :
* To revise or otherwise change entered data once registration of the
character is completed (by pressing the ( 씰 ) cursor key), use the
cursor keys ( 씱 ) ( 씰 ) to move the cursor to the desired position and
re-enter as desired.
* To enter a space, press the COPY/SPACE key to bypass the
location where the space is desired and then enter the next desired
character.
)81&7,21
5(*,67(5 63((' ',$/
5(*,67(5 63((' ',$/
5(*,67(5 $%%5 ',$/
$'(17(5 1R
6(7 '2&80(17
$'1(:',$/
68%
6,'
1$0($%&
02'(0
/2:
02'(0
+,*+
02'(0
0(',80