TA Triumph-Adler FAX 950 - Manual (Page 142)

10-24
6HFWLRQ
Options
(6) Number of Rings (2nd line)
When a incoming fax is received on 2nd line, the number of times the
bell will “ring” before the call is answered can be set here to any
number between 1 - 11.
* To cancel the procedure part way through, press the STOP key.
The message display will revert to the initial mode.
* If Restricted access is turned ON, it is first necessary to enter the
registered management password and then press the ENTER
FUNCTION key. Refer to “(5) Entering Your Access Code”, page 7-28.
1. Press the FUNCTION key.
2. Press the ( 씱 ) cursor key until the following message appears in
the message display.
3. Press the ENTER FUNCTION key.
4. Press the ( 씰 ) cursor key until the desired setting appears in the
message display.
5. Press the ENTER FUNCTION key.
6. Press the ENTER FUNCTION key once again.
7. Use the keypad to enter the desired number of rings for that
setting.
8. Press the ENTER FUNCTION key.
9. Press the STOP key. The message display will revert to the initial
mode.
(7) Changing the Automatic Reception Mode
(2nd line)
* This setting is fixed at “AUTO FAX RECEPTION” in this fax and can
not be changed.
* To cancel the procedure part way through, press the STOP key.
The message display will revert to the initial mode.
* If Restricted access is turned ON, it is first necessary to enter the
registered management password and then press the ENTER
FUNCTION key. Refer to “(5) Entering Your Access Code”, page 7-28.
1. Press the FUNCTION key.
2. Press the ( 씱 ) cursor key until the following message appears in
the message display.
3. Press the ENTER FUNCTION key.
4. Press the ( 씰 ) cursor key until the following message appears in
the message display.
5. Press the ENTER FUNCTION key.
6. Press the ( 씰 ) cursor key once.
7. Press the ENTER FUNCTION key.
8. Press the cursor keys ( 씱 ) ( 씰 ) until the desired automatic
reception mode appears in the message display.
9. Press the ENTER FUNCTION key.
10. Press the STOP key. The message display will revert to the initial
mode.
6(7 '2&80(17
6(77,1*
2) 5,1*6
6(71'/,1(
6(77,1*
)81&7,21
6(71'/,1(
2) 5,1*6
6(7 '2&80(17
6(77,1*
$8720$7,& 5(&(37,21
6(71'/,1(
6(77,1*
)81&7,21
6(71'/,1(
$8720$7,& 5(&(37,21
$872)$;5(&(37,21