TA Triumph-Adler FAX 950 - Manual (Page 104)

8-4
6HFWLRQ
Management Report/List Print Out
(2) Manual Print Out
* To cancel the procedure part way through, press the STOP key.
The message display will revert to the initial mode.
* If Restricted access is turned ON, it is first necessary to enter the
registered management password and then press the ENTER
FUNCTION key. Refer to “(5) Entering Your Access Code”, page 7-28.
1. Press the PRINT REPORTS key.
2. Press the ( 씰 ) cursor key until the following message appears in
the message display.
3. Press the ENTER FUNCTION key.
* If the optional Dual Line Kit is installed, proceed to step 4. If it is
NOT installed, proceed to step 6.
4. Use the cursor keys ( 씱 ) ( 씰 ) to select which line (the 1st line or the
2nd line) was used to schedule the communication.
5. Press the ENTER FUNCTION key.
6. The file number for communications stored in memory will now be
accessible in the message display. Press the ( 씰 ) cursor key to
select the file number corresponding to the communication you
want to verify.
7. Press the ENTER FUNCTION key.
A Memory entry report will be printed out.
User Setting List
Printing out this list enables the user to confirm settings made and
other registered information in this fax, such as the Remote switching
number.
* To cancel the procedure part way through, press the STOP key.
The message display will revert to the initial mode.
* If Restricted access is turned ON, it is first necessary to enter the
registered management password and then press the ENTER
FUNCTION key. Refer to “(5) Entering Your Access Code”, page 7-28.
1. Press the PRINT REPORTS key.
2. Press the ( 씰 ) cursor key until the following message appears in
the message display.
3. Press the ENTER FUNCTION key.
A User setting list will be printed out.
35,17 5(3257
0(025< (175< 5(3257
),/(
6(7 '2&80(17
0(025< (175< 5(3257
67/,1(
0(025< (175< 5(3257
1'/,1(
6(7 '2&80(17
35,17 5(3257
86(5 6(77,1* /,67
Confirmation Report
Printing out this report enables the user to confirm such information
as the file number, the scheduled start time and other party’s fax
number related to communications that were entered into memory
and scheduled to use the timer.
* To cancel the procedure part way through, press the STOP key.
The message display will revert to the initial mode.
* If Restricted access is turned ON, it is first necessary to enter the
registered management password and then press the ENTER
FUNCTION key. Refer to “(5) Entering Your Access Code”, page 7-28.
1. Press the PRINT REPORTS key.
2. Press the ( 씰 ) cursor key until the following message appears in
the message display.
3. Press the ENTER FUNCTION key.
A Confirmation report will be printed out.
6(7 '2&80(17
35,17 5(3257
&21),50$7,21 /,67