Caution – TA Triumph-Adler CLP 4524 User Manual

Page 94

Operation

Date en cours : 10 janvier 2008
C:\Documents and Settings\g097447\Bureau\LU 253068043 HFC colour USB - UTAX EN\Utilisation Gb.fm

You can also directly adjust the desired contrast using the key, press this

key several times

until the required adjustment is obtained without using

846.

The LUMINOSITY

parameter is used to make your original document lighter or darker. Adjust

the brightness required using keys

and

, then validate the choice with the OK key.

The BINDING parameter is used to choose the long or short side according to the type of binding
of your document. Make your choice using keys

and

, then validate the choice with the

OK key.

Caution -

All settings made using this menu become default settings of the machine.

Use keys

of the browser to scroll the setting described below that you want to modify.

Validate your setting by pressing the OK key.

Select NORMAL or THICK paper using

and

keys.

Validate your setting by pressing the OK key.

Note:

1) When

THICK

paper type is selected, the print speed is slowed down.

2) Use the manual feeder for paper with a weight greater than 90 g/m

Select the paper tray that you want to use; AUTOMATIC, LOWER or UPPER using

and

keys.

Validate by pressing the OK key.

This function prints all your documents duplex.

Note:

This function requires the prior installation on the rear of your machine of the duplex unit and the additional
paper tray.

This manual is related to the following products: