TA Triumph-Adler CLP 4524 - Manual (Page 123)

Maintenance
6-11
Date en cours : 10 janvier 2008
C:\Documents and Settings\g097447\Bureau\LU 253068043 HFC colour USB - UTAX EN\MaintenanceGb.fm
Op
er
ati
on
Setting yo
ur
machine
Getting started
Director
y
Mainte
nanc
e
Safety
Contents
Installation
Next, clean the main charger grid. Take the grid cleaner out of the toner kit. Take the grid
cleaner out of the protective bag and remove the cap.
Note: The pad of the grid cleaner contains water. Clean the grid quickly so that the pad may not dry off.
Lift up slightly on the main charger unit and pull it out a short distance as shown in the
figure below.
Attach the grid cleaner to the printer with the pad facing up.
Cap
Grid Cleaner
Main Charger
Unit
Grid Cleaner