TA Triumph-Adler CLP 4524 - Manual (Page 81)

Operation
5-5
Date en cours : 10 janvier 2008
C:\Documents and Settings\g097447\Bureau\LU 253068043 HFC colour USB - UTAX EN\Utilisation Gb.fm
Operation
Setting yo
ur
machine
Getting started
Director
y
M
aintenance
Safety
Contents
Installation
T
RANSMISSION OVER THE
P
UBLIC
S
WITCHED
T
ELEPHONE
N
ETWORK
(PSTN)
Immediate transmission
Position the document (please see the paragraph Document depositing, on page 5-1).
Enter the fax number or choose your dialling mode (please see the paragraph Dialling, on
page 5-3) then press
.
The "Line" icon flashes during the call phase, it stays lit when both faxes are in
communication.
At the end of transmission the initial screen is displayed.
Delayed transmission
This function allows you to transmit a document at a later time.
To program a postponed transmission you need to identify the subscriber number, transmission
time, feeder type and number of pages.
To delay the transmission time of your document:
Position the document (please see the paragraph Document depositing, on page 5-1).
Select 31 OK - FAX / TRANSMISSION.
Enter the subscriber number you wish to program at a different time or choose your dialling
mode (please see the paragraph Dialling, on page 5-3) and confirm with OK.
Next to the current time, enter the new time and confirm with OK.
Choose the required IMAGE or PDF format.
Choose SCAN B & W or COLOR SCAN.
Adjust the contrast and confirm by pressing the OK key.
Select the feed type, FEEDER or MEMORY and confirm with OK (please see the paragraph
Document feed type, on page 3-5).
You may enter the number of pages before transmission and confirm with OK.
Confirm postponed transmission by pressing key .
Your document is stored and will be sent at the new time.
Note: When sending in "Deferred Send" mode, make sure that the document in the feeder tray or on the scanner
window is located in the right direction.