beautypg.com

Technical parameters, Please see the paragraph technical parameters , on, Echnical – TA Triumph-Adler CLP 4524 User Manual

Page 47: Parameters

background image

Setting your machine

3-9

Date en cours : 10 janvier 2008
C:\Documents and Settings\g097447\Bureau\LU 253068043 HFC colour USB - UTAX EN\Configuration Gb.fm

Op

er

ati

on

Se

tting y

our

mac

hin

e

Getting started

Director

y

M

aintenance

Safety

Contents

Installation

T

ECHNICAL

PARAMETERS

As delivered your fax is preset by default. However, you may adjust it to meet your requirements
by resetting the technical parameters.

To set the technical parameters:

29 OK - SETUP / TECHNICALS

Select the desired parameter and confirm with OK.

With the

or

keys, modify the parameter settings by following the table below and

press OK.

Parameter

Setting

Signification

1 - SCANNING
MODE

1 - NORMAL
2 - FINE
3 - SFINE
4 - PHOTO

Default value of the scan mode resolution for the documents
to be transmitted.

2 - TX HEADER

1 - WITH
2 - WITHOUT

If this parameter is on, your header will appear on all
documents sent to your subscribers with your name, number,
date and number of pages.
Warning: If you send a fax from the document loader, the
transmission header will not appear on the document your
correspondent receives.

3 - TX SPEED

1 - 33600
2 - 14400
3 - 12000
4 - 9600
5 - 7200
6 - 4800
7 - 2400

Transmission speed for outgoing documents.

For a quality telephone line (compatible, no echo),
communications occur at maximum speed.
However, it may be necessary to restrict the transmission
speed for some calls.

4 - ECHO PROTECT

1 - WITH
2 - WITHOUT

If this parameter is on, the on-line echo will be reduced during
long distance calls.

6 - EPT MODE

1 - WITH
2 - WITHOUT

For some long distance calls (satellite), the on-line echo may
disturb the call.

7 - COM. DISPLAY

1 - SPEED
2 - PAGE NUMBER

Choice between transmission speed displayed or number of
the page in progress.

8 - ECO ENERGY

1 - WITHOUT
2 - DELAY
5 MIN
3 - DELAY
15 MIN
4 - DELAY
30 MIN
5 - DELAY
60 MIN

Choosing the printer standby delay: the printer will switch to
standby after a delay (in minutes) of NON-operation or during
the period of time of your choice.

This manual is related to the following products: