TA Triumph-Adler CLP 4524 - Manual (Page 148)

6-36
Maintenance
Date en cours : 10 janvier 2008
C:\Documents and Settings\g097447\Bureau\LU 253068043 HFC colour USB - UTAX EN\MaintenanceGb.fm
3 - If paper is jammed as shown in A, remove the paper by pulling the center up. If paper is
jammed as shown in B, remove the paper by pulling the edge.
4 - Open the rear cover and then the fuser cover, and remove the jammed paper.
Note: If the optional face-up tray is installed on the printer, remove that tray first before attempting to remove the jam-
med paper.
Caution -
The fuser unit inside the printer is hot. Do not touch it with your hands as it may result in
burn injury. Remove jammed paper carefully.
5 - Push the paper transfer unit back in and close the fuser cover and rear cover.
Registration Roller
A B
Registration Roller
Paper transfer
unit release lever
Paper transfer unit
Fuser Cover
Rear Cover