TA Triumph-Adler CLP 4524 - Manual (Page 20)

1-12
Installation
Date en cours : 11 janvier 2008
C:\Documents and Settings\g097447\Bureau\LU 253068043 HFC colour USB - UTAX EN\Installation Gb.fm
W
ALL CONNECTIONS
Caution -
Make sure that the mains On/Off switch of the scanner is set to "O" (Off).
T
ELEPHONE AND LAN CONNECTIONS
Connect the end of the telephone lead to the telephone wall socket (please see the paragraph
Terminal connections, on page 1-8), for the connections to the scanner.
Connect the end of the LAN cable (not supplied) to the local network connector that is allocated
to your terminal (please see the paragraph Terminal connections, on page 1-8), for the
connections to the scanner.
Note: The printer and the scanner have separate LAN connections. If you dispose of only one connection, you will need
a concentrator or a switch.
P
OWER LINE CONNECTION AND SWITCH ON
Caution -
Refer to safety procedures in the chapter Safety.
Connect the end of the scanner mains lead of the terminal to the mains wall socket.
First set the printer On/Off switch to "I" (On), then set the scanner On/Off switch to "I" (On).
After a few seconds, when the printer has warmed up, the date and time will appear. To adjust the
language and time of your terminal, please see the paragraph Setting your machine, on page 3-1.