TA Triumph-Adler CLP 4524 - Manual (Page 112)

5-36
Operation
Date en cours : 10 janvier 2008
C:\Documents and Settings\g097447\Bureau\LU 253068043 HFC colour USB - UTAX EN\Utilisation Gb.fm
MBX deposit in a remote fax
Insert the document in the fax machine’s feeder.
Select 35 OK - FAX / MBX SENDING and confirm with OK.
Enter your subscriber’s number for MBX deposit or choose your dialling mode (please see the
paragraph Dialling, on page 5-3) and validate with OK.
Enter the subscriber’s MBX number and confirm with OK.
If you wish to delay transmission, enter the new transmission time next to the current time and
press OK.
If you wish to modify the document feed type, select one of the options FEEDER or MEMORY ,
and press OK.
If you wish, you may enter the number of pages of your document before transmitting then
confirm your choice with OK.
Confirm the transmission request to a remote MBX fax by pressing key .
In the case of an immediate transmission, the document is sent immediately.
If the document is set for a postponed transmission the document will be stored in the memory and sent
at the requested time.
MBX polling from a remote fax
36 OK - FAX/ MBX POLLING
Enter your subscriber’s number for MBX deposit or choose your dialling mode (please see the
paragraph Dialling, on page 5-3) and validate OK.
Enter the subscriber MBX number and press OK.
Enter this MBX access code and press OK.
If you wish to delay the poll time, enter the departure time next to the current time then valide
with OK.
Confirm the MBX poll request by pressing key . .
As soon as the remote fax is subscribed, either immediately or later, the document(s) in the remote fax
MBX are receveid in your fax.
Note: please check for remote fax compatibility.