Rugged Cams Workhorse DVR 4 Channel - Manual (Page 99)

98
On the name input field, enter the name using the numeric buttons on the remote control or the
arrow (STW X) and [Select] buttons.
Caps lock Used to shift between upper
and lower case
BS
Backspace; used to delete
Space Used to insert a space
Cancel Used to cancel the save
Save and exit
Used to save and exit
After inputting the data, go to
[Save and Exit] using the [Tab]
or arrow (ST) buttons and
press the [Select] button.
The system name may contain up to 20 alphanumeric characters.
(6) Remote ID
Sets the remote control ID when multiple devices are used
Input signals from the remote control are received only when the DVR ID and remote control ID
match as shown below:
On the {System} menu, go to the remote control ID selection box using the arrow (ST)
buttons and press the [Select] button.