Rugged Cams Workhorse DVR 4 Channel - Manual (Page 121)

120
(3) Changing the system date and time
The system date and time can be changed only in NTP Server or OFF mode.
The system date and time format is Year/Month/Day Hour/Minute/Second. To set the display
format, select
{Main Setup}->{System}->{6. Date & Time}.
On the {NTP} menu, go to {2. Date and Time} using the arrow (ST) buttons and press the
[Select] button.
Go to the field to be changed using the arrow (W X) buttons and press the [Select]
button.
After changing the date and time using the arrow (ST) buttons, press [Select] .
The following message is then displayed, and the system time, changed:
(4) Time zone
Used to set the standard time
A) Daylight savings time
Used to apply the daylight savings time system
This field may be selected only when the corresponding region supports the DST.
On the {NTP} menu, go to {3.1. DST} using the arrow (ST) buttons and press the [Select]
button.
On the selection box, select ON or OFF using the arrow and [Select] buttons.
After the DST is selected, existing data are displayed as “OLD_” in the search and log list.
Before changing the date and time, set the standard time first.