Rugged Cams Workhorse DVR 4 Channel - Manual (Page 129)

128
(4) Setting the transmission rate
The transmission rate denotes the speed of communication with the PTZ camera.
•
•
The transmission rate must be the same as the communication speed of the PTZ camera.
Different methods are used to set the address of the PTZ camera depending on the
camera manufacturer or model. See the camera manual for reference.
On the {PTZ Setup} menu, select the {Transmission Rate} sub-menu and go to the channel
using the arrow (STW X) buttons. Afterward, press the [Select] button.
On the selection box, set the baud rate using the arrow (ST) and [Select] buttons.
(5) Preset time setting
Preset Used to move the PTZ camera up, down, right, and left, to zoom
in the image, and to control the focus to save the new setting
Up to eight settings can be saved. Setting numbers between 1
and 8 may be selected.
Tour Automatically controls the preset PTZ camera according to the
predefined order
Tour 1 is set as 9, and Tour 2, as 0.
Preset maintenance time
Tour interval (between 5 and 60 seconds)
On the {PTZ Setup} menu, select the {Preset Maintenance Time} sub-menu and go to the
channel using the arrow (STW X) buttons. Afterward, press the [Select] button.
On the selection box, select the preset maintenance time using the arrow (ST) and [Select]
buttons.