Rugged Cams Workhorse DVR 4 Channel - Manual (Page 119)

118
(1) Selecting the NTP menu
Select {Main Setup} and {NTP}.
(2) NTP mode
On the {NTP} menu, go to {1. NTP Mode} using the arrow (ST) buttons and press the
[Select] button.
On the selection box, shift to NTP mode using the arrow (ST) and [Select] buttons.
OFF NTP is not used.
Server The DVR time server is used.
Client DTS client is used, and server time, synchronized.
B) Server type
Settings may be defined in client {NTP Mode}. Select either the NTP server or DVR time server.
On the NTP menu, go to {1.1. Server type} using the arrow (ST) buttons and press the
[Select] button.