Rugged Cams Workhorse DVR 4 Channel User Manual
Page 132
131
To select 1, 2, or 3, use the [Tab]
button. For others, use the arrow (W X) buttons.
On the LAN Setup menu, set the LAN field.
When changing the last part of the existing address:
a)
Go to the input box using
the arrow (STW X) buttons and select the left arrow ( )
button.
b)
Go to
[BS] using the [Tab]
or arrow (ST) buttons.
c)
Delete only the incorrect value using the
[Select]
button.
d)
Enter the new value using the numeric buttons on the remote control or the
arrow (STW
X) and [Select]
buttons.
BS
Backspace; used to delete
Cancel
Used to cancel the save
Save and exit Used to save and exit
B) IP address setup
On the {Ethernet Setup} menu, go to the IP address input field using the arrow (ST)
buttons and press the [Select]
button.