Rugged Cams Workhorse DVR 4 Channel - Manual (Page 90)

89
5-1-3. Recording Schedule
Use {Recording Schedule} to save the system configuration as data from Data 1 to Data 4 and to
perform recording based on the system configuration for each day/time zone.
To apply the new setting, save the new setting.
[Holiday]
Sets holidays
[Save]
Saves the setting
[Cancel]
Exits without saving the setting
[Reset]
Initializes the setting
(1) Selecting the Recording Schedule menu
In {Main Setup} mode, go to {Recording Schedule} and click the [Select] button.
(2) Recording schedule setting
A) Setting by row
On the {Recording Schedule} menu, go to the date and time using the arrow (STW X) or
numeric buttons on the remote control.
Input numbers that are less than 10 in two digits using the numeric buttons, e.g., 01 for 1 and 02
for 2. At this time, the time line is highlighted.