Rugged Cams Vertex & Vertex RTH User Manual

Page 81

4) Peaking

①

Select {Peaking} for the channel using the arrow keys and the Select button.

②

On the selection window, select the peaking data you want to set.

5) Deinterlace

①

Select {Deinterlace} for the channel using the arrow keys and the Select button.

②

On the selection window, select whether to use this function or not.

6) Cording

①

Select {Cording} for the channel using the arrow keys and the Select button.

②

On the selection window, select whether to use this function or not.

※

Advanced Options

Menu Description
Comb/Trap

The Comb filter improves the resolution for brightness. It is
used when the boundary between brightness and color is not
clear. The Trap filter adjusts the definition of an image.

{Maximum Bitrate}

This is the largest unit for streaming moving images.

{Peaking}

Peaking is used to emphasize the edge of the Y elements.
The user can select No, 31%, 62%, or 93%. At 93%,
however, emphasis is highest for the edges. The default
value is 31%.

{Deinterlace}

This feature is designed to eliminate the horizontal lines
(shadows) in an image. It is applied only when full resolution
is used. The default value is ON.

{Cording}

Cording is a filter that flattens the edges of the Y
components in an image. It can be set to ON or OFF.
Selecting ON enables a soft image to be obtained. The
default value is OFF. Like Average Filter, Cording gives
similar results.