Rugged Cams Vertex & Vertex RTH - Manual (Page 2)

1
FCC Compliance Statement
Model Name: VerteX (VerteX -1648, VerteX -0824, VerteX -0424).
This device complies with Part 15 of the FCC Rules. Operation is Subject to the following
two conductions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operations.
WARNING
- Unauthorized reproduction of all or part of this manual is strictly prohibited.
- The figures in this manual are for illustration purposes only (may differ from the actual
product).
- The specifications and design of the product are subject to change without prior notice
for purposes of quality improvement.
CAUTIONS
To get the best use out of the product, be sure to read the cautions before using the
product. For safety, please take note of the following:
Instructions before using the product
1. To prevent electric shock when installing, moving, or opening the DVR
and peripheral devices, connect and disconnect the cables as instructed.
All cables must be connected to grounded power outlets.
2. If the product is installed near a power outlet, make sure it can be
unplugged easily.
3. Do not use the DVR in water or in wet places.
4. Keep the vinyl packing materials used for the DVR or other peripheral
devices out of reach of children (may cause suffocation).
Installation Environment of the DVR
1. Maintain the following conditions: operating temperature of 0˚C ~ 30˚C;
operating humidity of 10% ~ 80%
2. Install the DVR in a safe place that is free from external vibration.
3. Install the DVR in a well-ventilated place.
4. To protect the hard disk from data loss and breakdown, install the DVR
away from magnetic materials.
5. When using a rack other than the standard one, use a separate table with
sufficient spacing, i.e., 60cm from the floor, 50cm from the ceiling, and
20cm from the side and back walls and other objects.