Rugged Cams Vertex & Vertex RTH - Manual (Page 3)

2
Safety Notes on the DVR
1. When installing additional boards and HDD, separate the power cable and
turn OFF power supplied to the DVR completely.
2. Keep the product away from heat-generating devices such as heaters.
3. Do not use a damaged power cord.
4. To prevent problems due to magnetic interference and electric surge, use
only grounded cables and power outlets.
5. If the power cord is connected, do not touch the power unit (if the power
cord is connected, electric current is still flowing internally even after the
switch is turned OFF).
6. Do not place a heavy object on top of the product.
7. Do not drop a conductive object in the ventilation holes.
8. Allot sufficient space for system cabling.
9. Use only the parts indicated in the manual. Do not disassemble, repair, or
modify the product without permission.
10. Incorrect system setup may cause malfunction.
11. Shut down the system normally as instructed in the manual
Safety Notes on the Lithium Battery
1. Replace lithium batteries as instructed to avoid danger.
2. Dispose of used lithium batteries properly.
※
Warnings and Cautions are indicated as follows:
Possible injury or product damage
Risk of minor injury or product damage