Rugged Cams Vertex & Vertex RTH User Manual

Page 62

1) Selecting the system menu

①

On the initial Main Setup window shown in Figure 5-1, select the system using the arrow

keys and the Select button.

②

The system configuration menu will then appear as shown in Figure 5-7.

[Figure 5-7. System Setup Window]

2) {Local Administrator’s Password}

①

Select {Local Administrator’s Password} using the arrow keys and the Select button.

②

On the password input window, enter a password using the numeric buttons of the

remote controller or the arrow keys and the Select button (the password can contain up
to five digits).

3) {Automatic Menu Exit}

If no input is made in the System Setup menu using the front buttons, remote controller, or
mouse, the system automatically shifts to real-time monitoring mode.

①

Select {Automatically Exit Menu} using the arrow keys and the Select button.

②

On the selection window, select the time you want to set using the arrow keys and the

Select button.

OFF

Automatic Menu Exit is not used.
※

The user can exit the menu by pressing the [ESC] button in the

System menu.

10/20/30
seconds

If there is no input using the front button, remote controller, or mouse,
the system will shift to real-time monitoring mode.