Rugged Cams Vertex & Vertex RTH - Manual (Page 36)

35
4-10 Recording
4-10-1 Recording Types
The VerteX series supports various recording types as shown below.
Recording
Type Description
Automatic
Set the event recording frame and general recording frame separately.
Depending on the set value, select the recording type automatically
and proceed with the recording.
When motion, sensor, or sound is detected, the event recording frame
will be selected. Otherwise, the general recording frame will be
selected.
Continuous Continuous recording will be done based on the general frame value.
Motion
When motion is detected, recording will be done based on the event
frame value.
Sensor
When input signal from an external sensor is generated, recording will
be done based on the event frame value.
Sound
When sound is detected, recording will be made based on the event
frame value.
4-10-2 Recording Setup
The user can set the recording type by selecting {Main Setup} {Data Setup}. For more
information, see
{Main Setup} ( {Data Setup} ( {Recording Setup}.
4-10-3 Viewing the Recording Status
The user can view the recording status, hard disk status, and network connection status of
each channel as shown in Figure 4-3.
▶ Recording Status by Shape
EMBED
Unknown
Triangle Only video is recorded.
Triangle Only audio is recorded.
Square Both audio and video are recorded.
▶
Recording Status by Color
Green Continuous recording is in progress.
Red Motion recording is in progress.
Blue Sensor recording is in progress.
Yellow Sound recording is in progress.